Corolla 1996 Owners Manual

1997 Corolla DX 1.8 Owners manual. The extensive standard equipment list includes body side mouldings, tinted glass, full wheel covers, colour-keyed bumpers and rack & pinion steering with variable power assist. Corolla DX’s 1.6 Litre twin-cam 16-valve engine delivers an ideal combination of good low end torque with remarkable economy. Choose the economical 5-speed manual overdrive transmission or the convenience of a 3-speed automatic transmission. Or move up to Corolla DX 1.8 with a 105 hp. 1.8 Litre engine and a choice of 5-speed manual or 4-speed (ECT) automatic. The Corolla DX 1.8 includes wider P185/65 tires, front stabilizer bar and passenger airbag. Corolla Sedan SD delivers quality and value for a price that’s easily affordable.

Corolla SD’s long list of standard features includes styled steel wheels, halogen headlamps, intermittent wipers, rack&pinion steering, cupholders, sliding ‘B’ pillar shoulder belt anchors and radio prep kit. The powerful 1.6 Litre 100 hp. 16-valve engine and rugged 5-speed manual overdrive or optional 3-speed automatic transmission provide Corolla SD / SD Plus dependable performance and top fuel efficiency. The fully reclining front bucket seats and rear bench seat with thick, comfortable cushions seat five adults in comfort. Corolla SD “Plus” adds additional value with power steering, full wheel covers, digital clock, body side mouldings, AM/FM cassette, remote control mirrors and carpet mats. A driver airbag (SRS) and tilt steering wheel is also available.

Download

TOYOTA TACOMA FRONT HITCH INSTALLATION

Short Description
1. Remove 2 bolts, one from each end of front bumper beam. Pull out end caps and return to customer.
2. Place 4″ carriage bolt through spacer(CM-SP4) and into existing holes from the inside of the frame (both sides).

Website: sitepro12.sitepro.com | Filesize: 142kb
No of Page(s): 2

Content
3. Where the end cap was removed in step 1, place a 1/2″ x 1 1/4″ carriage bolt through spacer(CM-SP3) into the existing hole in the front bumper beam.
4. Hang side plates from carriage bolts installed in step 2 on the outside of the frames and finger tight with 1/2″ flange nuts.
5. Lift main body into place between side plates and loosely attach using 7/16″ carriage bolts and flange nuts as shown.
6. Attach straps of main body to 1/2″ carriage bolts placed in step 3. Finger tight with 1/2″ flange nuts.
7. Torque all 1/2″ fasteners to 75 ft.-lbs. and 7/16″ fasteners to 50 ft.-lbs. in the following order:
First: Fasten main body to side plates.
Second: Fasten strap to front bumper beam.
Third: Fasten side plates to frame